Pond Bottom Cleaner Probiotic For Cleaning The Pond Bottom Of Shrimp Farm Aquaculture Probiotics

Cost effective 

High quality 

It is a kind of biological living preparation composed by several beneficial bacterium and various of enzymes. It is natural, environmental protection and non-toxic, could be used to replenish the microorganism for degrading organics in septic tank killed by various of chemicals, to realize the goal of wastes deduction and deodorization. Meanwhile, it could bring the pipe blockage and stink of bathroom caused by organics under permanent control.

Ingredients

It is a biological active agent, contains a blend of beneficial bacteria and enzymes, such as Bacillus subtilies, Polymyxa, Aapergillus, Nocardia, etc.; Protease, Lipase, Cellulose, and some micro nutrient elements. 
Appearance:Tan fine powder 
Odor:Slight sweet-smelling 
PH Range:6.0-8.0, optimum 7.0 
Temperature:10°C-70°C, Optimum: 25°C-65°C 
Density:430-520kg/m3  
Humidity:  ≤15% 

Main Application Field

Deodorization&Decontamination Biological Product 
Septic tank wastes deduction and deodorization 
Breakdown organic matter in pit latrine 
Toilet&Pet house&Bathroom deodorization/drain dredging 
Garbage deodorization and deduction for built-in holding tanks in vehicles and vessels 
Muck natural sludge digester deodorization

Process and Dosage

The product needs to be added in for two stages: 
1. Start period (for septic tank only used for a short period) 
Dosage form for initial stage 
Tank capacity(m3) 2 
S/T Dosage(g) 450g 
water for dilute(L) 8

Septic tank used

For the newly started septic tank, the dosage could be deducted by 1/2 on the basis of the above list according to the actual conditions. Taking a 100m3 septic tank for example: Add 10kg first; four months later add 10kg again as per the actual demands. Three times for one year.
Normal service period(For septic tank already used for a long period)
Check the storage pool before using the it. Pump suction must be used providing the following conditions:
a. Solid matter exists at the top and the solid exceeding 15cm thickness;
b. The bottom with abnormal matters and the height is more than 30cm;
c. Tank PH Value: PH≥8 or PH≤6.5.
Usually the product should be added in after 2-3 weeks pump suction. The initial dosage: Dilute 1kg with 18 litre water, then add the solution into 2m3 tank.